If your washroom keeps running push button, it can be annoying and end up wasting a lot of water. At Emergency Plumbers Sydney, we receive a lot of calls regarding this issue. It is estimated that every time you flush the toilet, around 6 litres of water gets used. So, if there’s a fault in your washroom and it keeps running the push button, you will end up wasting hundreds of litres of water.
Call Now 96224888
What Can I Do If the Toilet Keeps Running Push Button?
If a washroom keeps running, it could be because of a problem inside the tank. To fix the issue, first we need to diagnose if the problem is with the fill tube, float or flapper chain. If your restroom keeps running after you push the button, there are a few steps you can take to troubleshoot and potentially fix the issue. First, remove the lid from the restroom tank and check the flush mechanism. Sometimes, the problem can be as simple as a misaligned or tangled chain that connects the flush handle to the flapper valve.
Ensure that the chain is properly connected and has enough slack to allow the flapper to close completely. If the chain appears fine, inspect the flapper itself for any signs of damage or debris that may prevent it from sealing properly. Additionally, check the water level in the tank to ensure it’s not too high, which can cause continuous running. If adjusting the chain, cleaning the flapper, or lowering the water level doesn’t resolve the issue, it may be time to call a professional plumber to diagnose and repair any more complex underlying problems with the restroom’s mechanism. Taking these steps can help you address the running restroom issue and prevent unnecessary water wastage.
Based on the findings, the parts will have to be adjusted, replaced or repaired to make your washroom work properly again. The best thing to do is to call a Plumber in Sydney to resolve the problem ASAP.
Do Not Attempt A DIY Fix
We strongly recommend that you do not attempt to fix the issue yourself, as you run the risk of making it worse than better. It can be tempting to try to fix it yourself, but toilets and tanks have different parts and might need a different fix. So, what you need is an Experienced Plumber in Sydney who will know what parts you need and how to fix the problem without any damage.
Attempting a DIY fix for a running restroom with a push button may seem like a simple solution, but it’s important to proceed with caution. Without proper knowledge and experience, DIY attempts could potentially worsen the problem or cause damage to the restroom’s mechanism. If your restroom continues to run despite pushing the button, it’s advisable to seek assistance from a qualified plumber.
Professional plumbers have the expertise to diagnose the underlying issue accurately and implement the appropriate repairs efficiently. By entrusting the task to a professional, you can avoid potential complications and ensure that your restroom is restored to optimal functionality without risking further damage. Don’t hesitate to reach out to a trusted plumber for assistance with your running restroom—seeking professional help is the safest and most effective course of action.
What to Do While You Wait for The Plumber to Arrive?
Once you call the plumber, you can go ahead and switch off the water supply to prevent any further water wastage. At Emergency Plumbers, we are a Plumbing Service. Once you give us a call, we will get to you at the earliest to get your plumbing problem fixed.
Our rates are very affordable and all of our plumbers have extensive experience in the plumbing filed, so you are guaranteed a quality job.
Whether it’s a leaking tap, broken washroom or gas fitting, contact Emergency Plumbers Sydney today on 96224888.
Or contact us via our website form.