What Causes Burst Water Pipes

A burst water pipe can be a homeowner’s worst nightmare. Not only is it a costly repair, but it can also cause extensive damage to your home if not addressed quickly. 

Few factors that can contribute to burst water pipes

1. Air Pressure

To keep water flowing smoothly through pipes and sprinklers, pressure needs to be applied to the water system. When water flows through pipes, they expand due to temperature changes. As the temperature drops, the pipes contract slightly. This causes pressure to build inside the pipes, and if the air pressure inside the pipes becomes great enough compared to the pressure outside of them, then the pipes burst.

2. Frozen Pipes

Water freezes at 32 degrees Fahrenheit. If one day the water pipe gets frozen, the water expands and exerts a tremendous amount of force on the pipe wall. Over time, this can cause cracks in the pipe wall. These cracks allow water to leak out of the pipe, causing the pipe to burst.

3. Leaky Pipes

Another way that pipes can burst is if the pipe wall is damaged or worn down. A thin layer of metal on the surface of the pipe conducts electricity and therefore increases the chances of electrochemical corrosion. This can weaken the pipe wall over time, leading to leaks.

4. Damaged Pipe Wall

Pipe walls tend to crack after extended use. Cracks in the pipe wall lead to even greater damage, which further weakens the pipe. Eventually, these damages can become larger than the diameter of the pipe, causing it to burst.

5. Corrosion

Over time, metals corrode naturally. This causes the metal to erode and lose its structural integrity. However, if the pipe is made of copper, aluminium, brass, or galvanised steel, then corrosion may not be as big of a problem.

6. Tree Roots

Trees’ roots can grow into water pipes and block the flow of water. As the tree roots grow, they put pressure on the pipe wall, which can cause the pipe to crack or burst.

7. Blockages

Blockages in water pipes are another common cause of burst water pipes. The most common type of blockage is a clog, which is caused by a build-up of debris in the pipe. This can include things like dirt, grease, hair, and even toilet paper. If the clog is not removed, it will continue to grow and eventually cause the pipe to burst.

8. Improper Installation

If pipes are not installed properly, they are more likely to burst. This is because the pipes are not supported correctly and are more likely to move around, which can cause them to crack or break.

9. Poor Quality Pipe

If a pipe is made of poor-quality materials, it is more likely to burst. This is because the materials are not strong enough to withstand the pressure of the water flowing through them.

10. Age

Older pipes are more likely to burst than newer pipes. This is because they have been used more and are more likely to have cracks or damage.

How Can You Prevent Your Pipes From Bursting

How can you prevent your pipes from bursting ?

Bursting pipes can cause extensive damage to your home and be very costly to repair. Luckily, there are a few things you can do to help prevent your pipes from bursting:

  • Insulate your pipes: This will help to keep the water inside your pipes from freezing and expanding, which can put pressure on the pipe and cause it to burst.
  • Repair any leaks: Leaks in your pipes can lead to corrosion, which weakens the pipe and makes it more likely to burst.
  • Check for blockages: Blockages in your pipes can cause pressure to build up, which can eventually cause the pipe to burst.
  • Replace old or damaged pipes: Older or damaged pipes are more likely to burst, so it is important to replace them before they cause any damage.
  • Get a professional inspection: A professional plumber can check for any problems with your pipes and help you fix them before they become a bigger issue.

Bursting pipes can be a major problem, but there are things you can do to help prevent them. By taking some simple precautionsprecautions, you can help keep your pipes in good condition and avoid costly repairs.

 

How much does it cost to repair a burst water pipe ?

 

Burst water pipes are a plumbing problem that can cause significant water damage in your home. Burst pipes can be caused by several factors, including wear and tear, tree roots, and blocked pipes. If you have a burst pipe, it is important to call a professional plumber as soon as possible to minimise the damage.

The cost to repair a burst water pipe will vary depending on the size of the pipe and the extent of the damage. However, it is generally advisable to hire an experienced plumber to avoid further problems. Burst water pipes can be very dangerous and should be fixed as soon as possible.

 

Who is responsible for repairing a burst water pipe?

 

Burst water pipes are the responsibility of the property owner. If the burst pipe is on the mains supply, then you should contact your local water company. However, if the pipe is on your own property, then it is your responsibility to repair it.

If you have burst water pipes, it is important to turn off the water supply to your property immediately. This will help to prevent further damage to your property. You should then contact a professional plumber to repair the damage. 

Experienced plumbers will be able to quickly identify the cause of the problem and make the necessary repairs. Burst water pipes can be a serious problem, so it is important to make sure that they are repaired properly. If you do not have the necessary experience or expertise to repair

 

Can insurance cover the costs of repairing a burst water pipe?

Burst water pipes are one of the most common causes of property damage, and they can be very expensive to repair. Most homeowners insurance policies will cover the cost of repairing a burst pipe, but there may be some limits on the amount of coverage. It’s important to read your policy carefully to understand what is and is not covered.  If you have any questions, you should contact your insurance agent or company.

If you think you have a burst water pipe, it’s important to call anemergency plumbers as soon as possible. They will be able to assess the situation and determine the best course of action. Depending on the severity of the issue, they may be able to fix the problem on the spot or they may need to replace the pipe. In either case, it’s important to get the problem fixed as soon as possible to avoid further damage.