Toilet Keeps Running Push Button? Here’s What to Do

Posted on 03th March 2020

If you’re toilet keeps running push button, it can be annoying and end up wasting a lot of water. At Emergency Plumbers Sydney, we receive a lot of calls regarding this issue. It is estimated that every time you flush the toilet, around 6 litres of water gets used. So, if there’s a fault in your toilet and it keeps running the push button, you will end up wasting hundreds of litres of water.

  Call Now 1300 237 246

 

What Can I Do If the Toilet Keeps Running Push Button? 

If a toilet keeps running, it could be because of a problem inside the tank. To fix the issue, first we need to diagnose if the problem is with the fill tube, float or flapper chain.

Toilet Keeps Running Push Botton What To Do

Based on the findings, the parts will have to be adjusted, replaced or repaired to make your toilet work properly again. The best thing to do is to call a Plumber in Sydney to resolve the problem ASAP.

Do Not Attempt A DIY Fix

We strongly recommend that you do not attempt to fix the issue yourself, as you run the risk of making it worse than better. It can be tempting to try to fix it yourself, but toilets and tanks have different parts and might need a different fix. So, what you need is an Experienced Plumber in Sydney who will know what parts you need and how to fix the problem without any damage.

What to Do While You Wait for The Plumber to Arrive? 

Once you call the plumber, you can go ahead and switch off the water supply to prevent any further water wastage. At Emergency Plumbers, we are a Plumbing Service. Once you give us a call, we will get to you at the earliest to get your plumbing problem fixed.

Our rates are very affordable and all of our plumbers have extensive experience in the plumbing filed, so you are guaranteed a quality job.
Whether it’s a leaking tap, broken toilet or gas fitting, contact Emergency Plumbers Sydney today on 1300 237 246.

Or contact us via our website form